This Invacare HomeFill II Oxygen Filling System includes the HomeFill II filling compressor IOH200, 2 post valve cylinders and regulator with the option to add additional cylinders, regulators, carry bag and/or Ready Rack stand.
The compact Homefill II revolutionizes ambulatory oxygen by allowing patients to fill their own Invacare Homefill II oxygen cylinders from Invacare PerfectO2 oxygen concentrators. With HomeFill II oxygen concentrators, providers virtually eliminate cylinder deliveries, reducing costs by three-to-one, and patients enjoy their freedom and independence with an unlimited supply of ambulatory oxygen. The HomeFill II Oxygen Filling System allows the patient to breathe at home from a continuous flow oxygen concentrator and then use a convenient ambulatory pack when they are "out and about."
Homefill II Oxygen System Includes:
- 1 each - IOH200 Homefill II Compressor
- 2 each - Homefill II Post Valve Cylinders
- 1 each - Oxygen regulator or pulse conserver
- Optional Homefill Ready Rack
- Optional nylon cylinder carry bag
Homefill Oxygen System includes your choice of either two ML6, two M9 or two D size cylinders:
- Each ML6 cylinder provides up to 6.5 hours (pulse setting 2, 20 bpm) and weighs 4.2 lbs.
- Each M9 cylinder provides up to 10 hours (pulse setting 2, 20 bpm) and weighs 5.4 lbs.
- Each D cylinder provides up to 15 hours (pulse setting 2, 20 bpm) and weighs 6.5 lbs.
FEATURES |
|
|
|
|
|
|
|
|
|
|
|
|
To speak with a customer service representative, call 800-956-6616
Physician's Prescription Required
For your convenience, you may have your physician fax the prescription to 800-956-6282
- Provides greater freedom by filling oxygen cylinders at home
- Compatible only with Invacare oxygen concentrators
- Fills cylinders with oxygen produced from concentrator
- Freely breathe from oxygen concentrator while filling cylinder
- Includes two HomeFill II post valve cylinders and regulator
- Optional ready rack and carry bag if needed
- Multiple cylinder sizes available
| Electrical Requirements: | 120 VAC, 60 Hz, 2.0 Amps |
| Power Consumption: | 200 Watts |
| Inlet Pressure Rating: | 14 - 21 PSI |
| Oxygen Output (from concentrator): | 0 - 3 LPM (while filling cylinders) |
| Oxygen Input: | 0 - 2 LPM |
| Cylinder Fill Time (avg.) | |
| ML6: | 75 min. |
| M9: | 125 min. |
| D: | 210 min. |
| Cylinder Capacity | |
| ML6: | 170 liters |
| M9: | 255 liters |
| D: | 422 liters |
| Cylinder Weight | |
| ML6: | 4.2 lbs. |
| M9: | 5.4 lbs. |
| D: | 6.5 lbs. |
| Compressor Dimensions: | 20.25"W x 15"H x 16"D |
| Compressor Weight: | 33 lbs. |
| Limited Warranty | |
| Homefill II Compressor: | 3-year (or 5,000-hours) parts and labor on internal-wear components and control-panel components. |
| Homefill Cylinders: | 1 year |
| Conserving Device: | 2 years |
| Ready Rack: | 1 year |
