Invacare MicroAIR MA95Z Lateral Rotation w/ AP/Low Air Loss Mattress & Pump


MSRP: $11,177.15
(You save $5,892.15 )

Free Shipping
Lowest Price Guarantee

For more details, SEE BELOW.
Order Here
MSRP: $11,177.15
(You save $5,892.15 )

The Invacare MicroAIR Alternating Pressure Mattress Systems are a powered alternating pressure mattress replacement designed to aid in the prevention and treatment of pressure ulcers (bed sores). The MA95Z reduces interface pressure by alternately inflating and deflating 24 individual 10-inch air cell bladders. 

Patients with immobility or perceptual problems who remain bedridden for extended periods can develop open sores at points where the weight of the body compresses the skin, often under bony prominences like the hips or shoulders. These sores are called pressure ulcers. 

The alternating pressure mattress replacement system helps in pressure ulcer treatment and management by shifting pressure to different parts of the body in a repeating cycle, which prevents any body area from being under pressure all the time.

  • New wireless fowler technology, real time pressure monitoring and energy conserving power units combine to make MicroAIR therapeutic support surfaces the most efficient and dynamic support surfaces in the market
  • Digitally controlled constant pressure monitoring maintains recommended therapy 
  • Pressure reduction helps the caregiver to prevent and treat Stage I to Stage IV pressure ulcers and promote capillary circulation 
  • Horizontal configuration of 24, 10" air bladders, 3" side bolsters and a 2" foam safety pad combine to create a full depth 16" pressure reducing mattress replacement system 
  • Fits most standard hospital beds 
  • Unique Z-cell bladder design allows for gentle, subtle patient movement and pressure relief treatment 
  • Lateral rotation is smooth and subtle with patented z-cell bladder that turns patient up to 45 degrees 
  • Unique and patented designs of the power unit combine comfort and technology for patient relief and inspire caregiver confidence 
  • Control panel is designed with icons to provide easy, intuitive operation for caregivers 
  • 1275 LPM blower unit has alarm, alarm silence, and lock out features 
  • Lateral turning mode available in rotation times between 5 minutes to 4 hours 
  • Max Inflate mode for patient transfers 
  • True Low Air Loss therapy at 1275 lpm provides pressure ulcer relief, therapy and skin moisture management 
  • Mattress has non-skid bottom and secured to bed with 10 nylon web buckled hold-downs 
  • Waterproof, anti-microbial 4-way stretch quilted top cover with slip layer helps protect against friction and shear 
  • Mattress will not bottom out with hoses attached to the compressor power unit, even without power 
  • Specially designed connectors are inset to help protect them from accidental dislodging when in use  
  • Built-in 2" foam safety pad for additional protection during power outages if hoses are disconnected from power unit
  • Control unit and mattress are latex-free
  • Overall mattress size is 36"W x 80"L x 16"H (16"H includes 3" side rail bolsters)


To speak with a customer service representative, call 1-800-956-6616

  • Lateral rotation, alternating pressure and true low air loss provide pressure relief and moisture management
  • Lateral rotation turns patient up to 45° on either side
  • Alternating pressure inflates and deflates air cells to redistribute pressure points
  • 1275 LPM blower provides dry and temperate environment
  • Adjust firmness and turning time for individual comfort
  • Max inflate mode for patient transfers
  • 2" foam base in case of power failure
  • Side bolsters help prevent patient falls
  • Fluid resistant, vapor permeable, low shear quilted cover
  • Mattress dimensions: 80"L x 36"W x 16"H
  • Weight capacity starting at 350 lbs.
Electrical Power: 115 VAC, 50/60 Hz, 2 A
Max Power Consumption: 150 ± 10 W
Circuit Protection: Dual fused, 250 V, 5 A fast blow fuses
Mode of Operation: Continuous
Max Flow Rate: 1275 ± 100 LPM
Max Flow Pressure: 35 ± 5 mmHg
Max Flow Timer: 15 minutes
Support Surface Inflation Time: <1 minute
Patient Comfort Control Pressures
Soft Pressure: 8 ± 4 mmHg
Firm Pressure: 32 ± 4 mmHg
Rotation Time: 5 min. to 4 hrs.
Rotation Angle: 0 - 45° ± 5°
Operating Conditions
Ambient Temperature: 50° - 95° F
Relative Humidity: 30% - 75% Non-condensing
Atmospheric Pressure: 70 - 106 kPa
Storage and Shipping Conditions
Ambient Temperature: -40° to 158° F
Relative Humidity: 10% - 100% Non-condensing
Atmospheric Pressure: 50 - 106 kPa
Safety Code Approval: 16 CFR 1632, 16 CFR 1633,
Mattress Size
Width: 36"
Length: 80"
Height: 16" includes 3" side rail bolsters
Power Unit Size: 15"W x 11"H x 6.5"D
Power Unit Weight: 15 lbs.
Weight Capacity: 350 lbs.
Cover: Waterproof
Urethane 4-way Stretch Quilted Nylon
1000 Denier Nylon Bottom
Limited Warranty
Power Unit: 2 years
Mattress: 1 year
Cover: 1 year